Technical characteristics
General
Channels:
40 (80)
Modulation modes:
AM/FM
Frequency ranges:
from 26.565 MHz to 27.405 MHz
Antenna impedance:
50 Ohms
Power supply:
13.2 V
Dimensions (WxHxD):
116 x 36 x 168 mm
Weight:
0.8 kg
Accessories supplied:
Electret microphone with
support,
mounting device,
screws.
Filter:
ANL (Automatic Noise Limiter)
built-in
Transmission
Frequency stability:
+/- 300 Hz
Transmission power:
1 W AM / 4 W FM
Transmission interference:
inferior to 4 nW (- 54 dBm)
Frequecy response:
300 Hz to 3 KHz in AM/FM
Emitted power in the adj. chann.: inferior to 20 µW
Microphone sensitivity:
10 mV
Power consumption:
1.5 A max.
Modulated signal distortion:
1.8 %
Reception
Maxi. sensitivity at 20 dB sinad: 0.5 µV - 113 dBm (AM/FM)
Frequency response:
300 Hz à 3 kHz in AM/FM
Adjacent channel selectivity:
60 dB
Maximum audio power:
3 W
Squelch sensitivity:
minimum 0.2 µV - 120 dBm
maximum 10 mV - 27 dBm
Frequency image rejection rate: 60 dB
Intermediate frequency rej. rate: 70 dB
Power consumption:
500 mA nominal
1500 mA maximum
Trouble shooting
Your CB radio does not transmit or your transmission power
is poor:
Check that the antenna is correctly connected and that the SWR
is properly adjusted.
Check that the microphone is properly plugged in.
With the "push-to-talk" switch activated, the display flashes. Release
the "push-totalk" switch, then press it again to reactivate the trans-
mission mode.
28
