External loudspeaker
At the back side, the stabo xm 3003 is equipped with a jack (C)
for connecting an external loudspeaker with an 8
W
impedance.
For improving the fidelity of reproduction, a loudspeaker can be
connected using a 3.5 mm mono jack plug. Install the loudspeaker
such that all possibilities of injuries to you or your passengers are
excluded in case of an accident.
Microphone jack
Connect the supplied microphone to the microphone jack at the
left front side of the radio set. Make sure that the recess on the
plug is oriented downwards. A packet radio modem (TNC) can
also be connected to this jack.
Adjustment according to countries (6)
The stabo xm 3003 features three different channel configurations.
Prior to using the radio set, one of the adjustments has to be
selected.
80 FM channels / 80* AM channels
This configuration is permitted in Germany only
*Transmitting in AM on channel 1-40 only
40 channels FM / 40 channels AM
40 channels FM
When switching the radio set on, the selected channel configuration
is displayed for three seconds instead of the channel.
For changing the configuration, please proceed as follows.
1. Switch the radio set off.
2. Set the program switch (6) to the PRG position.
3. Switch the radio set on again.
The display flashes now and shows the formerly selected channel
configuration.
4. Use the channel switch to select one of the three configurations
(d, EU or EC).
5. Set the program switch (6) to the OFF position.
6. Switch the radio set off and on again.
For control purposes, the new channel configuration is now
displayed for the next three seconds. Afterwards, the radio set is
ready for operation with the new channel configuration.
In Germany, the radio set stabo xm 3003 is free of charge and
can be operated with each channel configuration without any
registration, transmission in AM is restricted to channels 1-40.
Before using your radio set abroad, make yourself familiar with
the applicable regulations for the respective countries and consider
a possible compulsory registration.
24
