Hardware Reference Guide
SST-PFB3-PCI
E.1 CE Compliance
This device meets or exceeds the requirements of the following standard:
•
EN 61326:1998 including amendments A1 and A2: - Class A - “Electrical equipment for measurement,
control and laboratory use - EMC requirements.
Warning
This is a Class A product. In a domestic environment this product may cause radio
interference in which case you may be required to take adequate measures.
Caution
This equipment is neither designed for, nor intended for operation in installations
where it is subject to hazardous voltages and hazardous currents.
Marking of this equipment with the symbol
indicates compliance with European Council Directive
89/336/EEC - The EMC Directive as amended by 92/31/EEC and 93/68/EEC.
Note
To maintain compliance with the limits and requirements of the EMC Directive, it is
required to use quality interfacing cables and connectors when connecting to this
device. Refer to the cable specifications in the Hardware Guide for
selection of cable types
.
Note
The backplane voltage supply for this equipment must be delivered as Separated Extra
Low Voltage (SELV).
46
CE
Compliance
©2003 Woodhead Software and Electronics, a division of Woodhead Canada Limited.
Document Edition: 1.0, Document #: 715-0060, Template Edition: 1.0, Template #: QMS-06-045.
Use, duplication or disclosure of this document or any of the information contained herein is subject to the restrictions on page ii of this document.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com