User Manual
HART/EtherNet/IP Gateway
GT200-HT-EI
WWW.SSTAUTOMATION.COM
2
gateway internal resistor and support connecting 15 HART slaves with an external resistor (250 Ohm).
[9] Supports all commands of the HART protocol.
[10] Each HART command can be configured for change-of-state output, polling output, initialization output or
disable output.
[11] Supports up to 127 HART commands, HART output data buffer is up to 1000 bytes, and the input data buffer
is up to 1600 bytes.
[12] Supports an internal or external HART series resistor.
[13] Max input and output bytes of EtherNet/IP:
Max input bytes: 256 bytes.
Max output bytes: 256 bytes.
[14] Power: 24VDC (11V~30V), 70mA (24VDC).
[15] Operating temperature: -40 °F~140 °F(-40 °C~60 °C). Humidity: 5%~ 95% (without condensation).
[16] Dimensions (W*H*D): 1.0 in * 4.0 in * 3.6 in (25 mm * 100 mm * 90 mm).
[17] Installation: 35mm DIN RAIL.
[18] Protection Level: IP20.
1.4 Related Products
The related products include: GT200-HT-RS, GT100-EI-RS etc.
To get more information about related products, please visit SSTCOMM website:
.
1.5 Revision History
Revision
Date
Chapter
Description
V1.0, Rev A
9/29/2017
Chapter 2
Add configuration notes into chapter 2.
Hardware and software description revised.
V1.0, Rev B
4/20/2020
Chapter 6
Part modifications for chapter 6.
V1.3
8/9/2021
ALL
New release for updated product version.
V1.3 , Rev A
8/24/2021
Chapter 2.7, 4.2
Revised some mistakes.
V1.3, Rev B
07/01/2022
Chapter 5
Add HART Common Commands (ID 1 and
ID 3) to this section
