User Manual
HART/EtherNet/IP Gateway
GT200-HT-EI
WWW.SSTAUTOMATION.COM
43
In the picture above, SSTGateway:O.Data [0] ~SSTGateway:O.Data [31] is the corresponding output data address
of the SST Gateway module in scanner.
Unfold "SSTGateway: I", as shown below:
In the above picture, the first 4 bytes of SSTGateway: I. Data [0] are the status bytes. SSTGateway:I.Data [1]
~SSTGateway: I. Data [32] are the input data from the SST Gateway.
