User Manual
HART/EtherNet/IP Gateway
GT200-HT-EI
WWW.SSTAUTOMATION.COM
19
5.2.2.2 Add a Node
Select the”HartChannel0”, Right click the mouse and select "Add Node" in the pop-up menu.
Click the added node, set the slave address in the right configuration plate, and please notice that the HART
channel can only be equipped with one slave node which address is 0 when configured in the single point mode.
Note: When configured node numbers are more than the actual connected devices, the redundant node will lead to
the longer time of polling circle. so, it is recommended that configured node numbers should be the same as actual
devices.
5.2.2.3 Add HART Commands
Select the “Node (x)”, Right click the mouse and click “Add Command”.
Choose the command you want in the popup menu, and then click “OK” to exit:
