SSK SSK513, Руководство по установке и эксплуатации

Страница: 53 / 59

The following table demonstrates how the totalizers are displayed under various configurations of the Unit Multiplier (that is,
resolution) and Dial Type. The non-shaded digits are transmitted as defined by the dial type.
For example, if the dial type is 4-dial and the resolution is 10000 then an arbitrary totalizer value of 99999999 is displayed on
the meter as 9999 0000 and 9999 is transmitted to the receiving application. In this configuration it will take 10000 units (i.e.
USG) before the display totalizer is updated to a new value. For this example the display totalizer will rollover to 0000 0000 .
Dial
Type
Unit Multiplier
(Resolution)
Display Digits
1 2 3 4 5 6 7 8 9 0
4 dial
10000 1 2 3 4 0 0 0 0
1000 1 2 3 4 0 0 0
100 1 2 3 4 0 0
10 1 2 3 4 0
1 1 2 3 4
0.1 1 2 3 . 4
0.01 1 2 . 3 4
0.001 1 . 2 3 4
0.0001 0 0 1 2 3 4
5 dial
10000 1 2 3 4 5 0 0 0 0
1000 1 2 3 4 5 0 0 0
100 1 2 3 4 5 0 0
10 1 2 3 4 5 0
1 1 2 3 4 5
0.1 1 2 3 4 . 5
0.01 1 2 3 . 4 5
0.001 1 2 . 3 4 5
0.0001 1 . 2 3 4 5
6 dial
10000 1 2 3 4 5 6 0 0 0 0
1000 1 2 3 4 5 6 0 0 0
100 1 2 3 4 5 6 0 0
10 1 2 3 4 5 6 0
1 1 2 3 4 5 6
0.1 1 2 3 4 5 . 6
0.01 1 2 3 4 . 5 6
0.001 1 2 3 . 4 5 6
0.0001 1 2 . 3 4 5 6
7 dial
10000 Not Applicable – Not enough display digits
1000 1 2 3 4 5 6 7 0 0 0
100 1 2 3 4 5 6 7 0 0
10 1 2 3 4 5 6 7 0
1 1 2 3 4 5 6 7
0.1 1 2 3 4 5 6 . 7
0.01 1 2 3 4 5 . 6 7
0.001 1 2 3 4 . 5 6 7
0.0001 1 2 3 . 4 5 6 7
Installation & Operation Manual
Page 53 March 2014