SSI CS8900 Скачать руководство пользователя страница 60 | Manualshive

Страница: 60 / 60

SSI CS8900 Скачать руководство пользователя страница 60

59

Exporting GPX

The GPX coordinates can be exported into a format that describes the locations of the defect stations.
The GPS coordinates of the defect can be viewed through the defect start station, defect end station
or the defect peak station. Specific runs can be chosen to retrieve the GPS coordinates by adjusting

the drop down menu under the title, “Select Run to Export.”

Under the title of Data to Export there are multiple check boxes. In or

der to export the defect’s GPS

coordinates,  the  All  Raw  GPS  locations  check  box  must  not  be  checked.  Once  the  All  Raw  GPS
Locations  box  is  deselected,  the  options  to  export  the  defect  stationing  GPS  coordinates  become
available.

Troubleshooting

Profiler Hardware Not Found

Check the serial port connection from the profiler to the computer. Check that the profiler has power
and is charged. If software disconnects from hardware, close SSI Profiler and reopen the program with
the profiler powered on. If problem persists, close the program and shut the power off to the profiler.
Wait five seconds then turn the power to the profiler on. Then open the SSI Profiler program. If the
issue is not solved, contact SSI customer support.

Distance or Height Readout is not Accurate

Check the calibration of the device through the collect window, calibrate, and calibration summary. If
necessary recalibrate the distance or height of the device. It does not happen frequently, but in some
cases the distance encoder shaft does slips on the axle. In this case, tighten the coupler within the
machine. If unsure about the steps, contact SSI Customer Support

Do Not Replace the Device Components with Store Bought Items

Surface  Systems  and  Instruments  designs  and  manufactures  their  custom  built  profilers  in  house.
Replacing  damaged  parts  that  are  inadequate  will  adversely  affect  the  ability  to  collect  accurate
profiles. Please contact SSI for replacement parts.

Updating the Software

If your SSI Profiler license has expired, you will not be able to update. Contact SSI to renew your license
and receive new software updates.

«
...
58
59
60

Содержание CS8900





























































Отзывы:

Нет отзывов