48
Low Pass Filter
–
The Low Pass Filter will remove any trend in the data that is greater than the
chosen length. The length can be selected by typing the value in the box or by using the arrows
to adjust the input.
Export Raw Data
Selecting the Export Raw Data check box assures the operator that only unfiltered data collected from
the profile will be exported into the chosen file.
The entire data run is being exported since there are not station extractions.
Match Tracks
Selecting ‘Match Tracks’ exports all of the tracks associated with the lane file. For the three laser
systems, this includes Track 1, 2 and the center trace. For the Profilograph files, the tracks are matched
based on the settings entered prior to profiling. The label of the track number and stationing cannot
be changed after collection. This feature does not have to be used for the sidewalk profiler system.
Ignore Pauses
Pauses are used when an obstruction comes into the profiling path or when a section of pavement is
not to be profiled. Stationing is to remain constant and under the same file. Pauses can either be
omitted or included in reports and exported file of the Profiler V3 software. To omit pauses from the
export
ed file, select the check box, “Ignore Pauses.”
Pauses are used as an interval or segment event
for the sidewalk profiler system.
Figure 56: An enlarged view of the ERD export window settings.
Содержание CS8900
Страница 30: ...29 Figure 32 A collection without events selected Figure 33 A collection with a point event at 0 14 3 feet...
Страница 39: ...38 Figure 41 The collection data included in a sidewalk report Figure 40 The top of a sidewalk report...
Страница 47: ...46 Figure 53 Selecting a location to save the exported file Figure 54 The export type drop down menu...