33
Finalizing a Collection
Saving the File
After a collection is completed, the file can be viewed in reports or saved. To save the file, selecting
File>Save or through Ctrl+S on the keyboard. These actions will open Windows Explorer for the file to
be saved. If the file is not saved and the operator navigates away or tries to close the program, Profiler
V3 will ask the operator to save the file.
Default Naming Convention
The default naming convention for SSI Profiler is in the form of:
YYYYMMDDTTTT.
An example of this is: 201212021635
This name means the file was saved in the year 2012, December 2
nd
, at 4:35pm.
Opening a New File
To open a new file after a collection, select File>New or Ctrl+N on the keyboard. When a new file is
opened, the lower left corner of Profiler V3 will display “New File.”
Mapping
The mapping feature can be used to navigate to defects in the profile based on the GPS coordinates.
Mapping can be used in trace view or through the compass and distance readout on the Mapping
window. To navigate to a defect using Mapping:
1)
Open a file in SSI Profiler with defects
2)
Open the Mapping window through the shortcut bar or through
View>Mapping.
3)
At the top, select a run and click on the “Navigate To” icon.
4)
The user may choose to navigate to a defect, station, segment, or a specific
GPS coordinate. Choose the option from the drop down menu. Select a
location and click on the green Start Navigation icon.
5)
Follow the instructions of the mapping to get to the destination.
Note: A GPS signal and a collection using GPS is required to use Mapping feature.
Содержание CS8900
Страница 30: ...29 Figure 32 A collection without events selected Figure 33 A collection with a point event at 0 14 3 feet...
Страница 39: ...38 Figure 41 The collection data included in a sidewalk report Figure 40 The top of a sidewalk report...
Страница 47: ...46 Figure 53 Selecting a location to save the exported file Figure 54 The export type drop down menu...