SSI CS8900, Руководство пользователя, Страница: 33 / 60

32
At this time, the program will display the home screen for the collection window. More runs may be
collected, or collections may be viewed under reports.
New File
After collecting a file and before collecting another run, save the current collection and open a new
file. This will prevent data from being overwritten or unorganized.
Point Events
Point events are the sections of the sidewalk that do not meet specifications through the height or
width requirements.
Segment Events
Segment events are interruptions or important structures that occupy intervals of the sidewalk.
Segment events include crosswalks, driveways, sections without sidewalks, curb ramps, bus stops,
and pauses which are related to the profile. Segment events are started during a collection by
selecting ‘Start Interval.’ At this time the status bar will turn yellow and will display the stationing of
where the interval was started. To end the interval, select ‘End Interval.’ Segment events can be added
and edited after the collection in ended, before the run is saved. Adding additional segments is where
the odometer is useful.
Key Press Notes
Key Press Notes are the user inputted notes that can be entered for each event. The notes are entered
through the keyboard, hence their name, key press notes. These notes will appear on the sidewalk
report next to the event type and the event
’ s location through GPS and stationing.
Odometer
The odometer can be found in two places within the SSI Profiler program, both under the collection
window. The initial odometer is on the home screen of the collection window. This odometer will be
in the form of a separate window. The second odometer aids the user in adding and editing events
after a collection is ended.
Pause
A pause is a section of the profile that can be excluded or specifically viewed to determine its profile
ride number (IRI, PRI, etc.)
Profile Collection
When a data collection begins, the system will collect the profile of the sidewalk. Once the profile
collection is started, events can be entered in the form of point or segment events.
Interval Collection
An interval collection is the process of adding a segment event to the collection. To add a segment
event, select the ‘Start Interval’ icon during a collection. After the collectio n the user will be able to
edit the event and apply a type of segment event before saving the collection.