SSI CS8900, Руководство пользователя, Страница: 51 / 60

50
Include Run up-Run out Data
Some High Speed Profiling data files have Run Up and/or Run Out data associated with them,
depending on the practice used to collect the data. If this data exists in the data file, it will be included
in the exported file if this box is selected.
Run up data only exists in HSP (High Speed Profiler) data files if the operator selected a run up and/or
run out distance in the initial stages of setting up a collection. The Run up and Run Out settings are
found in the HSP collection software, in the last window before performing a collection.
Export Raw Data
Selecting the Export Raw Data check box assures the operator that only unfiltered data collected from
the profile will be exported into the chosen file.
Match Tracks
Selecting ‘Match Tracks’ exports all of the tracks associated with the lane file. For the three laser
systems, this includes Track 1, 2 and the center trace. For the Profilograph files, the tracks are matched
based on settings entered prior to profiling. The
number label assigned to the track and the stationing
are settings that cannot be changed after collection. This feature does not have to be used for the
sidewalk profiler system.
Ignore Pauses
Pauses are used when an obstruction comes into the profiling path or when a section of pavement is
not to be profiled. During a pause distance is still collected but height data can be omitted. Pauses
can be omitted or included in reports based on the selection in the Analysis Parameters window.
Pauses are used as a segment or interval event for the sidewalk profiler system.
Figure 58: An enlarged view of the optional settings
when exporting in PPF format.