51
Exporting to PRO Format
General Settings
Station Extraction
The operator has the option to export
only
certain sections of the data, based on the stationing set
within the profiling data. To use this feature, select the check box near “Specify Station Numbers.”
When the box is selected, the operator will be able to
adjust the stationing numbers. The ‘Start’
stationing is the initial stationing where the exported file will begin, while the ‘End’ stationing is the
point where the exported file will finish. These values can be adjusted by typing values into the box
or by using the arrow keys to the right of the box.
Filter Settings-High Pass length
The operator has the option to change the High pass filter length when exporting files to PRO format.
A High Pass Filter removes all of the data trends below the filter length. The default length of the High
Pass Filter is 200 feet. In order to export the data without filtering, the ‘Export Raw Data’ check box
must be selected. See ‘Export Raw Data’ below.
Export Raw Data
Selecting the Export Raw Data check box assures the operator that only unfiltered data collected from
the profile will be exported into the chosen file.
Match Tracks
Selecting ‘Match Tracks’ exports all of the tracks associated with the lane file.
For the three laser
systems, this includes Track 1, 2 and the center trace. For the Profilograph files, the tracks are matched
based on settings entered prior to profiling. The label of the track cannot be changed after collection.
This feature does not have to be used for the sidewalk profiler system.
Figure 59: The export window when PRO format is selected.
Содержание CS8900
Страница 30: ...29 Figure 32 A collection without events selected Figure 33 A collection with a point event at 0 14 3 feet...
Страница 39: ...38 Figure 41 The collection data included in a sidewalk report Figure 40 The top of a sidewalk report...
Страница 47: ...46 Figure 53 Selecting a location to save the exported file Figure 54 The export type drop down menu...