SRT Thuraya, Руководство по эксплуатации, Страница: 43 / 73

Item Description
❶ Enable DHCP Server on
Modem Settings
Your Thuraya IP Commander has a DHCP server, which assigns
IP addresses to devices connected to its local area network. You have the
option of turning it on and off.
There are two reasons you might want to disconnect your DHCP server:
1. All of your network devices have been configured with static
IP addresses.
2. You are connected to an existing local area network which also has
DCHP services.
Even if your devices have been assigned static IP addresses, if you wish to
add more devices to this same network, the easiest way to bring them in is
to enable the DCHP server. Review the DHCP Address Range start and
end points.
Ensure that the static IP addresses fall above and/or below the addresses
shown in the Address Range fields (item ❸ ). In other words, If the DHCP
address range goes from 192.168.1.100 to 192.168.1.200, you can assign
static IP addresses beginning with 192.168.1.2 through 192.168.1.99.
Additional static IP addresses can be assigned within the range of
192.168.1.201 through 192.168.1.253.
❷ Modem’s LAN IP Address This is the static IP address assigned by the modem’s manufacturer. It can
be changed on the Advanced→Network Configuration screen.
❸ DHCP Address
Range: Start/End
By assigning a range of IP addresses to be used by the DHCP server,
addresses outside this range can be manually assigned to devices when
required.
❹ Lease Duration
The IP addresses assigned to devices on the LAN by the DHCP server are
renewed/refreshed at predetermined periods of time. This default is 3600
seconds, or once per hour.
❺
Update DHCP Settings But-
ton
Use this button to bypass the scheduled DHCP lease duration and imme-
diately renew/refresh the DHCP assignments to all devices on the
LAN using DHCP services, as well as set changes on the DHCP server.
Table 14: DHCP Settings
27
3. Web Configuration Tool