SRS Labs CTC100, Руководство пользователя

Страница: 63 / 177

Operation 51
CTC100 Programmable Temperature Controller
Next,
must be entered separately. First a numeric input screen appears
appears where you can select e completed instruction
will pause the program for one second.
three times.
Press the start button. While the program is running, the current instruction is highlighted and
the number of repetitions remaining appears next to the right square bracket. In addition, while the
program is running, a tab
appears at the top of the screen. By touching this
tab, you can enter and start a second program while the first program is still running.
Messages window.
Once the program has finished the start button to run the program again,
window.
R unning concurrent macro s
A macro can run for a long period of time or even indefinitely possible to start a
run multiple instances of a
saved macro simultaneously.
The CTC can run up to ten concurrent macros started from the front panel. If an eleventh macro
When the CTC100 i
macro. Any other macros that might have been running when the CTC100 was switched off are not
re-started.
Setup
Press key to configure the CTC100. The Setup screen has between 1 and 5 blue tabs
at the top, depending on how many channels are selected
parameters that affect the entire instrument, like the RS-232 baud rate, the display brightness, and