SRS Labs CTC100, Руководство пользователя

Страница: 53 / 177

Operation 41
CTC100 Programmable Temperature Controller
Output Enable key again to leave standby mode. There is no remote command for entering or
exiting standby mode.
C hannels
In 1, In 2, etc.
Channel .selected { on, off }
Each of the green buttons represents one I/O channel. The
buttons are arranged in roughly the same order as the connectors on the back of the CTC100. Each
. If no sensor or heater is connected, the value
may be blank.
Buttons turn red name of the channel appears in
bold if the channel uses a custom calibration table.
Touch one or more buttons to select channels to view on the Show Data and Setup screens.
Group 1, Group 2, etc.
Group { 1, 2, 3, 4 }
The top of the Select Channels screen has four blue tabs that can be used to save and recall groups
of selected channels. Touch one of these Group tabs to select the channels in the group (all other
channels are de-selected). To modify the definition of a group, simply select or de-select channels
while the group is selected.
The group number also appears in the top-left corner of the screen. Touch the group number to
advance to the next group. R advances to the next
group.
Show D screen
This screen displays data from the selected channels as graphs or as numbers. The tabs at the top
of the screen control how data is displayed. Press the key repeatedly to change the
selection group. Each of the four groups remembers its display format (single, multiple, etc.) as
w
range may also change.
Note that the graphs always show data recalled from the log. If data is deleted from the log, it no
longer appears on the graph. In addition, if the log interval is sufficiently long, the graphs may have