SRAM ROAM 50, Руководство по обслуживанию

Страница: 8 / 40

8 ROAM 60 & RAIL 50 End Cap Replacement
Insert one of the FR/440 Front Hub Tools into the hub against the
face of the installed bearing.
Place the FR/440 Front Hub Tool and wheel onto a bench. Install
the other bearing onto the axle with the red seal facing away from
the hub.
Insert the Small Stepped Tool into the axle and bearing. Install the
other FR/440 Front Hub Tool onto the Small Stepped Tool and
against the bearing face.
Strike the FR/440 Front Hub Tool with a soft face mallet until the
bearing is firmly seated into the bearing pocket.
8
FR/440 Front Hub Tool
9
10
Small Stepped Tool
FR/440 Front Hub Tool
11