34
ROAM 60/50 & RAIL 50 Rear Hub Bearing Replacement
Clean both star ratchets and inpect for damage. If either star
ratchet is damaged, the damaged part must be replaced. Apply
a very thin layer of
DT Special Grease
to all surfaces of both star
ratchets.
N OT I C E
Only use
DT Special Grease
on the star ratchets. Using any other
grease, or applying too much
DT Special Grease
can prevent the
ratchets from engaging. If the ratchets do not engage properly,
clean them and reapply a thin layer of
DT Special Grease
.
Install the two star ratchets onto the axle.
Clean the driver body and install the spring into the driver body.
The wide opening of the spring is against the driver body.
N OT I C E
Installation of the 9/10 speed driver body is the same as for XD
driver body.
Install the driver body onto the axle. Firmly press the driver body
against the hub to make sure the teeth of the driver body are
engaged with the teeth of the star ratchets and ring nut.
34
DT Special Grease
DT Special Grease
35
36
37
Содержание ROAM 50
Страница 1: ...2014 ROAM 60 50 RAIL 50 Service Manual...
Страница 40: ...www sram com GEN 0000000004463 Rev A 2013 SRAM LLC...
