SRAM ROAM 50, Руководство по обслуживанию

Страница: 31 / 40

31 ROAM 60/50 & RAIL 50 Rear Hub Bearing Replacement
Insert the axle into the Ring Nut Installation Tool. Carefully turn the
wheel clockwise to thread the ring nut into the drive side of the
hub. Do not overtighten the ring nut.
N OT I C E
After the ring nut has engaged the threads inside the hub, you will
need to raise the Ring Nut Installation Tool in the vise to prevent
the vise from scratching the hub shell.
Install one of the Short Installation Cylinders into a vise. Install the
disc brake end of the axle into the Short Installation Cylinder.
Place the rotor seal onto the Seal Installation Tool with the rubber
seal facing the tool. Place the tool onto the axle with the rotor seal
facing toward the hub.
N OT I C E
If the rotor seal shows any signs of damage, it must be replaced
with a new rotor seal.
Place a Long Installation Tool onto the axle. Strike the Long
Installation Tool with a soft face mallet until the rotor seal is seated
in the hub shell.
22
23
Short Installation Cylinder
24
Seal Installation Tool
25
Long Installation Tool