SRAM ROAM 50, Руководство по обслуживанию

Страница: 36 / 40

36 Tubeless Rim Tape
T u b e l e s s R i m T a p e
We recommend that you have your SRAM wheels serviced by a qualified bicycle mechanic. Servicing SRAM products requires
knowledge of bicycle components as well as the special parts and tools used for service.
For exploded diagram and part number information, please refer to the Spare Parts Catalog available on our web site at www.sram.com.
For order information, please contact your local SRAM distributor or dealer.
Information contained in this publication is subject to change at any time without prior notice. For the latest technical information,
please visit our website at sram.com.
Your product's appearance may differ from the pictures/diagrams contained in this publication.
P a r t s a n d T o o l s
• ROAM 50/60 = 26 mm width rim tape
• RAIL 50 = 28 mm width rim tape
• Nitrile gloves
• Apron
• Clean, lint-free rags • Wheel truing stand
• Isopropyl alcohol
• Small flashlight
• Small knife
• Scissors
T u b e l e s s R i m T a p e I n s t a l l a t i o n
Install the wheel into a truing stand. Remove any existing rim strips
or rim tape from the rim. Remove the valve stem. Thoroughly clean
the rim with isopropyl alcohol and a clean rag. Make sure that the
rim is dry and free of alcohol. Spinning the wheel rapidly in the
truing stand can help remove alcohol from the spoke holes.
Apply the beginning section of tape between the two spoke holes
that are 180 degrees opposite from the valve stem hole. Press 4-5
inches (10-13 cm) of tape into the channel of the tire bed.
1
2