Electra Amsterdam Series Скачать руководство пользователя

Страница: 1 / 31

Bicycle Owner’s Manual

9th Edition, 2007

This manual meets EN Standards 14764, 14766 and 14781.

IMPORTANT:

This manual contains important safety, performance and service information.

Read it before you take the first ride on your new bicycle, and keep it for

reference.

Additional safety, performance and service information for specific components

such as suspension or pedals on your bicycle, or for accessories such as

helmets or lights that you purchase, may also be available. Make sure that your

dealer has given you all the manufacturers’ literature that was included with

your bicycle or accessories. In case of a conflict between the instructions in this

manual and information provided by a component manufacturer, always follow

the component manufacturer’s instructions.

If you have any questions or do not understand something, take responsibility for

your safety and consult with your dealer or the bicycle’s manufacturer.

NOTE:

This manual is not intended as a comprehensive use, service, repair or maintenance

manual. Please see your dealer for all service, repairs or maintenance. Your dealer

may also be able to refer you to classes, clinics or books on bicycle use, service,

repair or maintenance.

Содержание Amsterdam Series
































Результаты поиска

Содержание Amsterdam Series

Отзывы:

Похожие инструкции для Amsterdam Series

Бренды по названию

Популярные бренды

Electra Amsterdam Series, Руководство пользователя

Результаты поиска

Содержание Amsterdam Series

Отзывы:

Похожие инструкции для Amsterdam Series

Бренды по названию

Популярные бренды