Electra Amsterdam Series Скачать руководство пользователя страница 8

Страница: 8 / 31

• Take lessons from a competent instructor first

• Start with easy learning exercises and slowly develop your skills before trying

more difficult or dangerous riding

• Use only designated areas for stunts, jumping, racing or fast downhill riding

• Wear a full face helmet, safety pads and other safety gear

• Understand and recognize that the stresses imposed on your bike by this

kind of activity may break or damage parts of the bicycle and void the warranty

• Take your bicycle to your dealer if anything breaks or bends. Do not ride your

bicycle when any part is damaged.

If you ride downhill at speed, do stunt riding or ride in competition, know the

limits of your skill and experience. Ultimately, avoiding injury is your responsibility.

G. `Changing Components or Adding Accessories

There are many components and accessories available to enhance the

comfort, performance and appearance of your bicycle. However, if you change

components or add accessories, you do so at your own risk. The bicycle’s

manufacturer may not have tested that component or accessory for compatibility,

reliability or safety on your bicycle. Before installing any component or accessory,

including a different size tire, make sure that it is compatible with your bicycle by

checking with your dealer. Be sure to read, understand and follow the instructions

that accompany the products you purchase for your bicycle.

See also Appendix

A, p. 35 and B,

p. 41.

WARNING: Failure to confirm compatibility, properly install, operate

and maintain any component or accessory can result in serious injury

or death.

WARNING: Changing the components on your bike with other than

genuine replacement parts may compromise the safety of your

bicycle and may void the warranty. Check with your dealer before

changing the components on your bike.

3. Fit

NOTE: Correct fit is an essential element of bicycling safety, performance

and comfort. Making the adjustments to your bicycle which result in

correct fit for your body and riding conditions requires experience, skill

and special tools. Always have your dealer make the adjustments on your

bicycle; or, if you have the experience, skill and tools, have your dealer

check your work before riding.

WARNING: If your bicycle does not fit properly, you may lose control

and fall. If your new bike doesn’t fit, ask your dealer to exchange it

before you ride it.

A. Standover height

not obstruct a reflector or light.

• Make sure that your bicycle is equipped with correctly positioned and

securely mounted reflectors.

While riding at dawn, at dusk or at night:

• Ride slowly.

• Avoid dark areas and areas of heavy or fast-moving traffic.

• Avoid road hazards.

• If possible, ride on familiar routes.

If riding in traffic:

• Be predictable. Ride so that drivers can see you and predict your

movements.

• Be alert. Ride defensively and expect the unexpected.

• If you plan to ride in traffic often, ask your dealer about traffic safety classes

or a good book on bicycle traffic safety.

F. Extreme, stunt or competition riding

Whether you call it

Aggro, Hucking, Freeride, North Shore, Downhill, Jumping,

Stunt Riding, Racing

or something else: if you engage in this sort of extreme,

aggressive riding

you

will

get hurt,

and you voluntarily assume a greatly

increased risk of injury or death.

Not all bicycles are designed for these types of riding, and those that are may

not be suitable for all types of aggressive riding. Check with your dealer or the

bicycle’s manufacturer about the suitability of your bicycle before engaging in

extreme riding.

When riding fast down hill, you can reach speeds achieved by motorcycles,

and therefore face similar hazards and risks. Have your bicycle and equipment

carefully inspected by a qualified mechanic and be sure it is in perfect condition.

Consult with expert riders, area site personnel and race officials on conditions

and equipment advisable at the site where you plan to ride. Wear appropriate

safety gear, including an approved full face helmet, full finger gloves, and body

armor. Ultimately, it is your responsibility to have proper equipment and to be

familiar with course conditions.

WARNING: Although many catalogs, advertisements and articles

about bicycling depict riders engaged in extreme riding, this activity

is extremely dangerous, increases your risk of injury or death, and

increases the severity of any injury. Remember that the action depicted is

being performed by professionals with many years of training and

experience. Know your limits and always wear a helmet and other

appropriate safety gear. Even with state-of-the-art protective safety gear,

you could be seriously injured or killed when jumping, stunt riding, riding

downhill at speed or in competition.

WARNING: Bicycles and bicycle parts have limitations with regard to

strength and integrity, and this type of riding can exceed those

limitations.

We recommend against this type of riding because of the increased risks; but if

you choose to take the risk, at least:

Содержание Amsterdam Series
































Результаты поиска

Содержание Amsterdam Series

Отзывы:

Бренды по названию

Популярные бренды

Electra Amsterdam Series, Руководство пользователя

Результаты поиска

Содержание Amsterdam Series

Отзывы:

Бренды по названию

Популярные бренды