SportsArt Fitness T621 Скачать руководство пользователя страница 39 | Manualshive

Страница: 39 / 43

SportsArt Fitness T621 Скачать руководство пользователя страница 39

Inspecting and Testing

Model: T621
Inspection point: Optic wheel, optic sensor
Inspection method:    1. Inspect the optic wheel placement. The optic wheel should rotate in the center of the optic sensor.
                                          It should not touch the optic sensor.
                                      2. Inspect whether the teeth on the optic wheel have broken.
                                      3. Pull the walk belt to allow the optic wheel to move. Inspect whether LED7 on the drive board flashes.

When a tooth of the optic wheel is in the center of the optic sensor, LED7 on the drive board does not light.

                                          When a tooth of the optic wheel is not in the center of the optic sensor, LED7 on the drive board lights.
                                    4. The optic sensor includes an infrared transmitter and a receiver. Inspect whether the optic sensor is dirty.
                                          If so, wipe it clean.

4-3-1

Make sure that the optic
sensor wheel rotates in the
center to the optic sensor.

LED6 optic sensor signal
indicator

«
...
37
38
39
40
41
...
»

Содержание T621












































Отзывы:

Нет отзывов