21
4. POST-INSTALLATION CHECKLIST (CONTINUED)
ITEM 5:
Inspect the Boost Converter Mode Selector switch. This switch must be set to Inverter
Mode for normal operation.
Left Side Right Side
Mode selector switch position:
Left = Normal mode (Inverter connected)
Right = Inverter bypass mode (Load resistor mode)
Load resistor mode is used in the
event of an Inverter malfunction. This
mode requires the use of the Inverter
bypass box.
ITEM 6:
Make sure that the Cardio Unit / Boost Converter power switches are all in the On position.
The arrow (left) points to the power switch
on Cardio Units
1 – On: LED is lit.
0 – Off: LED is not lit.
The arrow (left) points to the power switch
on Boost Converters.
Left – On
Right – Off
Post Installation Checklist
Post Installation Checklist
