Controls
Electronic Speed Controller
Thumper VersaPro operates with a sophisticated electronic motor
controller incorporating speed feedback logic plus protection from
overheating or stalled motor conditions. Speed feedback logic means
that it maintains the RPM of each of its 6 designated speeds (ranging
from 16-30 pulses per second), regardless of load. When additional
force or weight is put onto the massaging pads, the controller
recognizes the extra load and adjusts the current to maintain its speed.
A reverse compensation takes place when the extra load is removed
and the motor speeds up. The adjustment takes place sixty times per
second and is not noticeable to the user. You have a choice of dual
controls - base or hand held remote. The base controller has 4 tactile
switches plus 13 led speed and massage profile indicators. The remote
controller has a 5 button interface plus a low voltage retractable cord
with RJ connectors. The 5th, recessed button (which is not on the base
controller) is a special 'remote only' feature button.
Remote Only Feature:
This button will deactivate the Base Controller when massaging
your Low Back, because clothing may contact the base Controller
buttons, causing the settings to change. This button will eliminate this
inconvenience.
To ACTIVATE: Hold down REMOTE ONLY button for 2 seconds, until you
hear 5 quick beeps.
To DE-ACTIVATE: Hold down REMOTE ONLY button for 2 seconds, until
you hear 2 quick beeps or simply Power Off, which resets to normal for
next power on.
No indicators exist on the remote. You will need to watch the base
controller, when using the remote, to see your settings.
10
Controls
Base Controller - 4 buttons
13 choices of massage settings
• 7 auto programs plus
• 6 manual settings
1 Power ON/OFF
2 Auto program selector
'
(press repeatedly, or hold to rotate
""' through 7 different auto profiles)
"- Auto program - led indicators
(GREEN lights)
-----:::--f--------
3 Power level UP
(manual, fixed setting)
4 Power level DOWN
(manual, fixed setting)
S-•-
4-•-
3-•-
2-•-
1-•-
..------ Power level - led indicators
(RED lights)
Remote Control - 5 buttons
Cl'I:> --L-----
1 Power ON/OFF
Cllll»
..i-------
-.
.
2 Auto Program selector
---1-------- 3 Power level UP
11
(manual, fixed setting)
4 Power level DOWN
(manual, fixed setting)
5 Remote Only
(special feature switch, hold
button for 2 seconds, until you
hear a multiple beep to deactivate
the base controller for low back
use)
Remote Controller – 5 buttons
Controls
Speed/ Power Settings: When powering ON, VersaPro will always
reset to Manual Power#3. This is your starting point. From here you may
go UP or DOWN with the Manual Speed triangles or divert to one of
the 7 Auto Programs. Thumper VersaPro has 13 different power/speed
settings. Speeds range from 1 at the weakest, to 6 at the strongest. You
can use the + or - triangular buttons to manually increase or decrease
the speeds.
In addition to fixed speeds, the VersaPro has 7 Auto Profile Programs,
which create a variance of speed and power to enhance your massage
and relaxation. The 7 auto programs are activated by the AUTO
PROGRAM button and cycle through from 1 to 7 as indicated by the
Green LEDs. Pressing the AUTO PROGRAM button repeatedly (or hold)
cycles in a counter clockwise direction. Watch the GREEN LED lights for
indication of which program you are currently running. Watch the RED
LED lights for indication of what power setting it is currently running.
Power profiles:
Low, Medium, High
Sine wave 1
�
____
.,
Random 3
Sine wave 2
�
---
--
�
�andom 2
Small Tsunami
�
�
Y
Random 1
Large Tsunami
12
Technique
(1) Feet: sitting or lying
(2) Calves: sitting or lying
Note: Never have the plastic edge of the machine compressing the veins
directly behind your knee
13
Controls
Speed/ Power Settings: When powering ON, VersaPro will always
reset to Manual Power#3. This is your starting point. From here you may
go UP or DOWN with the Manual Speed triangles or divert to one of
the 7 Auto Programs. Thumper VersaPro has 13 different power/speed
settings. Speeds range from 1 at the weakest, to 6 at the strongest. You
can use the + or - triangular buttons to manually increase or decrease
the speeds.
In addition to fixed speeds, the VersaPro has 7 Auto Profile Programs,
which create a variance of speed and power to enhance your massage
and relaxation. The 7 auto programs are activated by the AUTO
PROGRAM button and cycle through from 1 to 7 as indicated by the
Green LEDs. Pressing the AUTO PROGRAM button repeatedly (or hold)
cycles in a counter clockwise direction. Watch the GREEN LED lights for
indication of which program you are currently running. Watch the RED
LED lights for indication of what power setting it is currently running.
Power profiles:
Low, Medium, High
Sine wave 1
�
____
.,
Random 3
Sine wave 2
�
---
--
�
�andom 2
Small Tsunami
�
�
Y
Random 1
Large Tsunami
12
Technique
(1) Feet: sitting or lying
(2) Calves: sitting or lying
Note: Never have the plastic edge of the machine compressing the veins
directly behind your knee
13
Speed/ Power Settings:
When powering ON, VersaPro will always reset to Manual Power#3. This is your starting point.
From here you may go UP or DOWN with the Manual Speed triangles or divert to one of
the 7 Auto Programs. Thumper VersaPro has 13 different power/speed settings. Speeds range from
1 at the weakest, to 6 at the strongest. You can use the + or - triangular buttons to manually increa-
se or decrease the speeds.
In addition to fixed speeds, the VersaPro has 7 Auto Profile Programs, which create a variance of
speed and power to enhance your massage and relaxation. The 7 auto programs are activated by
the AUTO
PROGRAM button and cycle through from 1 to 7 as indicated by the
Green LEDs. Pressing the AUTO PROGRAM button repeatedly (or hold) cycles in a counter clockwi-
se direction. Watch the GREEN LED lights for indication of which program you are currently run-
ning. Watch the RED LED lights for indication of what power setting it is currently running.
Power profiles:
Low, Medium, High
1
Power ON/OFF
2
Auto Program selector
3
Power level UP
(manual, fixed setting)
4
Power level DOWN
(manual, fixed setting)
5
Remote Only
(special features switch, hold
button for 2 seconds, until
you hear a multiple beep to
deactivate the base controller
for low back use)
Sine wave 1
Sine wave 2
Small Tsunami
Large Tsunami
Random 1
Random 2
Random 3
