Spohn & Burkhardt FSMMD, Руководство по эксплуатации

Страница: 65 / 112

DRAFT
65
Spohn & Burkhardt
To return to the seated working position, proceed as follows:
Caution!
Make sure that only the elements for adjusting the related working position are actuated
while changing the working position. The controls and joysticks for operation are NOT
allowed to be actuated while changing the working position
7. Move the seat ( 1 ) back to the corresponding seat height (see chapter 5.2. „Working position adjust-
ment – manual“, Seite 59) .
8. Move the seat cushion (
1.1
) back to the corresponding seat depth (see chapter 5.2. „Working position
adjustment – manual“, Seite 59) .
9. Sit in the seat (
1
).
10. Adjust the footrest (
15
) and the consoles (
3
) to the required position (see chapter 5.1. „Working posi-
tion adjustment – electrical“, Seite 57) .
11. Continue operation .
6. Servicing
Danger!
All tasks on the device are only allowed to be undertaken by specialist personnel taking
into account the relevant safety regulations. Always pay attention to the safety instruc-
tions in
chapter 1. “Safety”, page 41.
6.1. Control stand
Servicing measure Interval
Visual inspection/cleaning Regularly
Function test Regularly
Checking screw joints Regularly
Lubricating freely accessible motor parts and motor
spindles Annually
6.1.1. Visual inspection
Danger!
Transport the control stand using suitable hoisting equipment. During transport, pay at-
tention to loose parts of the control stand.
1. Check the entire control stand and its components for soiling.
• If necessary, remove any soiling.
2. Check the control stand and its components for damage:
• Take damaged control stands out of operation.
• Replace damaged components, see chapter 7. “Repair”, page 67.