Spohn & Burkhardt FSMMD, Руководство по эксплуатации

Страница: 67 / 112

DRAFT
67
Spohn & Burkhardt
7. Repair
Danger!
All tasks on the device are only allowed to be undertaken by specialist personnel taking
into account the relevant safety regulations. Always pay attention to the safety instruc-
tions in
chapter 1. “Safety”, page 41.
7.1. Control stand
The repair of the control stand by the operating organization is not intended. If repair is necessary, con-
tact
SPOHN & BURKHARDT
( for address see Imprint, page 2).
7.2. Components
See the related documentation for information on the replacement and repair of the individual compo-
nents of the control stand.
8. Spare parts
For the complete list of spare parts, contact
SPOHN & BURKHARDT
( for address see Imprint, page 2).
9. Removal
Danger!
All tasks on the device are only allowed to be undertaken by specialist personnel taking
into account the relevant safety regulations. Always pay attention to the safety instruc-
tions in
chapter 1. “Safety”, page 41.
9.1. Disconnecting electrical connection
Note!
The control stand is wired to terminals or plugs/sockets according to the requirements of
the operating organization.
The electrical connections are disconnected according to the connection diagram, the
requirements of the operating organization and the related circuit diagrams,
see chapter .
„Spohn & Burkhardt“, page 36 .
1. Disconnect the system from the supply of electrical power.
2. Open the switch cabinet (
20
) using the related key (
20.1
).
3. Disconnect the connecting wires from the terminals or plugs/sockets.
4. Undo the nut on the cable gland (
20.2
) and pull out the wires.