Spohn & Burkhardt FS Series, Руководство по эксплуатации

Страница: 89 / 132

89
Spohn & Burkhardt
DRAFT
Variant with spacer 53035 and 53207
Figure 43.
18
18
17
17
4
4
15
15
15
15
Disconnecting electrical connections: Variant with spacer 53035 and 53207
1. Disconnect the system from the supply of electrical power.
1. Open the consoles,
see chapter 4.2. “Electrical connection” , point 9.
2. Disconnect the electrical connections.
3. Undo the lock nut (
21
) on the cable opening (
17
) and remove the corrugated tube (
22
), (see Figure
16 “Cable entry”, page 66).
4. Pull the cables out of the corrugated tube ( 22 ).
5. Undo the two securing screws (
18
) on the spacer (
4
).
6. Tip the control stand in the direction of the hinges (
15
), make sure that the control stand is secured
against tipping back and is placed on a suitable surface.
7. Disconnect the corresponding cables from the terminal block ( 20 ) (see Figure 16 “Cable entry”, page
66).
8. Tip back the control stand and tighten the two locking screws (
18
) in the spacer (
4
).
Variant with spacer 52832; 43666 and 53153
Figure 44.
17
17
4
19
23
Electrical connection: Variant with spacer 52832; 43666 and 53153
1. Disconnect the system from the supply of electrical power.
2. Open the consoles,
see chapter 4.2. “Electrical connection” , point 9.
3. Disconnect the electrical connections.