Spohn & Burkhardt FS Series, Руководство по эксплуатации

Страница: 90 / 132

DRAFT
90
Spohn & Burkhardt
4. Undo the lock nut (
21
) on the cable opening (
17
) and remove the corrugated tube (
22
), (see Figure
16 “Cable entry”, page 66).
5. Pull the cables out of the corrugated tube (
22
).
6. Undo the 5 screws (
19
) for the cover (
23
) on the spacer (
4
) and remove the cover (
23
).
7. Pull the cables through the cable opening (
17
).
10.2. Mechanical removal
1. Undo the 4 fastening screws from the fastening holes (
13
) in the mounting base (
8
).
2. Fasten suitable hoisting equipment to the control stand and lift the control stand out of the instal-
lation space.
Variant with spacer 52832; 43666 and 53153
1. Undo the 4 fastening screws M10 (
16
) on the spacer.
2. Fasten suitable hoisting equipment to the control stand and lift the control stand out of the instal-
lation space.
11. Disposal
The device is to be disposed of as per the national and international laws and regulations.
12. Reference documents
Technical data
You will receive the related technical data for each version of the control stand
FS
Dimension drawings
You will receive the related dimension drawings for each version of the control
stand FS
Circuit diagrams You will receive the circuit diagrams for each version of the control stand FS.
Spare parts You will receive the related spare parts list for each version of the control stand
FS.