Date of issue: January 2018
Revision 1 Page 28/48
Fig. 1
Fig. 2
6. POSITIONING
FOR MAINTENANCE STAFF ONLY
Installation and subsequent maintenance
operations must be carried out by staff
qualified and trained in the use of the
appliance in accordance with the
regulations in force.
a) After removing the packaging, preserve all
parts of it for winter storage
and ensure the
integrity of the appliance (fig. 1).
!IMPORTANT!
The packaging must be kept out of the
reach of children as it represents a
potential safety/health hazard.
b) Place the appliance on a solid and flat surface
leaving 25 cm on the left side in order to allow
the collecting drawer removal and 20 cm on all
others sides so that the body of the appliance is
well ventilated. Install the appliance in a dry
area and avoid installing it near heat sources.
The ambient operating temperature should
be between 24°C and 32°C.
c) check that the mains voltage corresponds to
that indicated on the data plate and the power
available is appropriate for the requirements of
the appliance.
Insert the plug into an earthed socket, avoiding
multiple sockets.
FOR FURTHER PRECAUTIONS, READ THE
"CONNECTING TO MAINS POWER SUPPLY"
SECTION CAREFULLY.
d) The installation must be performed according
to the manufacturer's instructions. Failure to
comply with these instructions may impair
operation of the appliance.
Important
Earthing is necessary and required by law.
Before carrying out any cleaning or
extraordinary maintenance be sure to
disconnect the appliance from the mains by
removing the power plug.
In case of breakdown or malfunction switch off
the appliance and unplug it.
