56
INSTALLING PERFORMER 2
HANDRAILS
Bactericidal joint
PVC endcap
PVC profile
M3 self-tapping
screw
If using an endcap:
• Begin by placing the endcap and the bactericidal joint on one side of the
PVC profile.
• Check that the endcap is perpendicular to the PVC profile before fixing.
• Attach the endcap using a 3 mm self-tapping screw in the PVC profile.
• The self-tapping screw must be positioned 5 mm from the edge of the
endcap.
• Slide the aluminium rail into the PVC profile.
• Ensure that the bosses used to hold the joint in place are properly
inserted in the accessory slots.
Two lengths of PERFORMER 2 handrails can be joined with a single
piece that aligns and secures the joint. The jointing piece is fixed to
the aluminium rail with two 5 mm socket screws.
In case of a PERFORMER 2 handrail, offset the ends of the aluminium
and PVC profiles to conceal any clearances.
On the other side of the rail:
• Place the joint and the required accessory (endcap or wall return)
on the other side of the rail and fix the accessory (according to the
specific procedure for the accessory above).
• Lock the assembly using a self-tapping screw at both ends of the
aluminium profile.
• Finally, fit the snap-fixing clamps to the aluminium profile.
M3 self-tapping
screws
M3 self-tapping
screws
Snap-fixing clamps
PVC profile
Aluminium profile
Aluminium profile
PVC profile
Bactericidal joint