manualshive.com logo in svg

SPM ESCORT, Руководство по установке, Страница: 26 / 30

Поделиться
Скачать
SPM ESCORT Скачать руководство пользователя страница 26

60

HANDRAILS

If the wall surface is uneven, the brackets can be adjusted against the wall using 10 mm thick adjustment shims. These shims are fitted behind 

the brackets.

Where a service duct has been installed, a removable handrail section may be required to provide easier access to the duct.

The distance between the brackets must not exceed 1,200 mm. The handrail must be located in a low-impact area. The strength of the wall fixings 

must be suited to the forces exerted.

Service duct kit for ESCORT handrails

For ESCORT handrails, the service duct kit is created in-situ (by cutting the profile to the dimensions of the access cover using 45° mitred cuts).
If the removable ESCORT handrail section is longer than 1,100 mm, a quick-removable bracket will need to be fitted to the access cover. Quick-

removable brackets come with an assembly wedge that can be clamped into the groove in the aluminium rail with a 3 mm Allen key.

Rapid’Access

®

 articulated link:

 adaptable angle piece to provide access to service ducts. This accessory replaces the assembly wedge on one of 

the sides and allows the handrail to be partially removed.

11. ADJUSTMENT SHIM FOR ESCORT, STARLINE, LINEA’TOUCH AND TOUCH+ HANDRAILS

12. LAYING HANDRAILS WITH THE SERVICE DUCT KIT 

Shim

80 mm  

perforated bracket 

Bactericidal joint

Fastened with 2.5 mm 

Allen screws

Rotates about a 90° axis

 

Handrail cut at 45°

Rapid’Access

®

Articulated PVC link

for service ducts

MG040+GT1

Quick-removable bracket 

for service ducts  

> 1,200 mm

Assembly wedges with 

thumb screws or 2.5 mm 

Allen screws

10 mm

41 mm

80 mm

TECHNICAL SOLUTIONS

45° cut

105 mm

45° cut

Bracket spacing 1,200 max

Handrail section 1,100 mm max

Quick-removable assembly wedge

100 mm

Содержание ESCORT































Отзывы:

Нет отзывов