46
INSTALLING LINEA’TOUCH AND TOUCH+
HANDRAILS
Joining angle pieces with straight lengths
Joining made-to-measure angle pieces with straight lengths
2.5 mm Allen fastening
screw
2.5 mm Allen fastening
screw
Made-to-measure
angle piece
Sleeve glued to the made-to-
measure angle piece
Handrail
Bactericidal
joint
5.2 PREPARING LINEA’TOUCH AND TOUCH+ HANDRAILS
• Slide the brackets into the groove of the aluminium profile.
• Position the end brackets at no more than 50 mm from the end of the profile.
• Set the brackets at maximum intervals of 1,200 mm.
• For short handrail lengths, use at least two brackets at even intervals.
• Fix the brackets to the aluminium profile using a 2.5 mm Allen key.
• Then insert the accessories (endcaps, wall returns, jointing pieces, etc.) into the profile and secure with the pre-fitted screws until they are flush
and hold the accessory in place.
Refer to Sections 3.1 and 3.2 on how to calculate the cutting lengths for the profiles.
Once the profiles have been cut to length:
2.5 mm Allen
fastening screw
2.5 mm Allen
fastening screw
Spacing intervals of no more than 1,200 mm
(no more than 800 mm for heavy-traffic areas)
Spacing intervals of no more
than 1,200 mm (no more than 800 mm
for heavy-traffic areas)
Refined
bracket
Reinforced
bracket
PVC
sheath
PVC
sheath
Aluminium profile
Reinforced
aluminium profile
Closer to be cut to length by hand
using a utility knife.
Reinforced closer to be cut to length
by hand using a utility knife.
LINEA’TOUCH
LINEA’TOUCH+
