Splash SuperPools TitanPool3, Руководство пользователя

Страница: 6 / 26

6
4. Distribute the Legs (E) with two (2) stainless steel rings (G) slid onto each Leg (E) around the
perimeter of the pool. Next, insert one end of the Leg into the top rail hole closest to the end.
Put your foot against this leg end and stretch the other end of the leg until it fits into the next
top rail hole. Continue this process around the entire pool until all legs are inserted firmly into
the top rail.
5. The next step requires a minimum of two people. While one person lifts the top rail and legs up,
the second person should insert the galvanized connection pin (F) thru the sleeve of the pool
footstrap, thru the stainless steel rings and centered in the footstrap. Continue this process on
each pool leg until all are installed. At this point, the pool is ready for water, if the Easy Clean
Pump/Filter was purchased with your Titan3. If not, refer to the instructions in the Box 4.