Splash SuperPools TitanPool3, Руководство пользователя

Страница: 18 / 26

Step 3: Assembling the Outside Ladder Steps
1. Slide the first Exterior Step toward the bottom of the Exterior Step Rails (white). 2. Now insert two Metal Pins
into the Exterior Step Rails’ holes and push the Exterior Step down into place. 3. Make sure the metal pin is locked
into place. 4. Put the four Plastic Plugs into the four holes on the Exterior Step Rails.
Step 4: Connecting the Ladder Top with the Ladder’s Waterside Steps
1. Insert the two Top Ladder Handles into the assembled Interior Step’s holes. 2. Insert the Assembled Platform,
lining up the holes for the Metal Screws. 3. Insert the Metal Screws, apply the Nuts and Washers and tighten with
the Ladder Tool. 4. The Interior Steps are now complete.
1
2 3 4
4
©
2003-Splash Superpools Ltd.
Parts Needed:
Assembled Platform
Assembled Interior Steps
F. (2) Top Ladder Handles
N. (2) Metal Screws
N
F
Parts Needed:
B. (3) Exterior Steps (Tabs)
H. (2) Exterior Step Rails (White)
L. (6) Metal Pins
M. (4) Plastic Plugs
1 2 3 4
B
H
L
M