11
Care or your
TitanPool3
1.
Chemical Use- Consult with your pool chemical provider about the proper treatment of
your pool water. It is best to have your water tested, periodically, by a qualified Pool
chemical provider to determine what is required. Remember that over chlorination
of your pool will “Bleach Out” the liner, turning it white. This is not covered
under your warranty. If chlorine tablets are used, use proper dispenser. Do not place
chlorine tablets directly into the pool or skimmer. It is best to run your pump
whenever chlorine is being dispersed in the water.
2.
The high quality membrane of your Titan3 is designed for long term performance. Be
aware that the Top Rail membrane may tend to accumulate dirt from time to time. It is
best to keep it clean by periodically cleaning it with a mild detergent. Be Careful not to
get the detergent into the pool water.
3.
The blue walls of the Titan3 are quite glossy and may scratch if rubbed with an abrasive
surface or scraped, this should only be an appearance issue, and should not result in any
leakage. Additionally, due to the highly polished surface, dirt may stick from time to
time, but should wash off easily using a mild detergent and water.
Winterizing your
TitanPool3
1.
When winterizing your Titan3, it is recommended that winterization chemicals be
used to greatly improve the condition of your pool, when opening in the spring. Your
Titan3 Dealer should have these chemicals, but if not, other suppliers should be
available locally.
2.
The Titan3 should be drained down to a level below the return eyeball fitting. Keep this
fitting open to help maintain water level throughout the winter.
3.
Once proper depth has been reached, disconnect the entire Skimmer Assembly,
including the interior hoses, and remove from the pool. The Skimmer lower wall fitting
will need to be plugged from the inside of the pool.
4.
Disconnect the exterior hoses from the Pool walls. Then drain your pump and filter and
follow manufacturers procedures for proper winterization of their equipment.
5.
We recommend the use of a winter cover to help keep out leaves and other debris from
getting into the pool. A winter cover and cover pillow should be available from you local
Titan3 Dealer. Follow cover installation instructions included with winter cover. Attach
bungee cords to the pool legs.
6.
DAMAGE TO THE POOL FROM ICE IS NOT COVERED UNDER THE WARRANTY.
Remember that the winter cover is NOT a safety Cover and will not prevent drowning.
Always remain diligent about children and non-swimmer adults around the pool with the
winter cover in place.
Содержание TitanPool3
Страница 1: ...By Owner s Guide...
Страница 15: ...Titan3 Ladder Assembly Instructions...