PAGE 18
PHOBOS - USER MANUAL
In addition to the options on the Overview screen of Phobos,
there are a set of controls to further adapt each Convolver and
its impulse response. These can be accessed by clicking on the
letter of the Convolver you wish to edit (e.g. [W] as shown).
A D V A N C E D C O N V O L V E R C O N T R O L S
1.
3.
7.
9.
8.
6.
2.
5.
4.
1. PAN & LEVELS
The input controls the overall input level to the Convolver and
the output controls the overall output. Pan controls the stereo
field of the source (PAN: L50 to C to R50).
2. IR ENV (ENVELOPE)
The envelope contains all the controls for the envelope across
the amplitude of the impulse response and the Convolver signal.
• Attack
- Controls the time from note on to when the Con-
volver impulse response gets to full level. (0.000-5.000s)
• Hold 1
- Controls the length of time the Convolver impulse
response is held at full level, before decay. (0.000-2.000s)
• Decay
- Controls the speed the Convolver impulse response
level reduces from full to the Sustain. (0.000-5.000s)
• Sustain
- Controls the level the Convolver impulse response
plays after the Hold + Decay time. (-
∞
to 0.0dB)
• Hold 2
- Controls the length of time the Convolver impulse
response is held at the sustain level. (0.000-2.000s)
• Release
- Controls the time taken for the Convolver impulse
response to reduce to -
∞
dB after Hold 2. (0.000-5.000s)
• Curve
- Adjusts the contour of the release curve, 0.0 is linear,
+10 is convex, -10 is concave.
• V-Release
- (Voice Release) Controls the time taken after note
off for the convolved signal to reduce to -
∞
dB. (0.000-5.000s).
CLICK HERE