1.
3.
4.
5.
2.
6.
7.
8.
9.
10.
PAGE 11
PHOBOS - USER MANUAL
C O N V O L V E R S W, X ,Y
1. WAVE FORM DISPLAY
2. CONVOLVER
This signifies which of the three convolvers you’re editing. Click
on this to bring up the controls panel discussed in the
‘Ad-
vanced Convolver Controls’
chapter.
ALT/SHIFT/CLICK on this if you want to reset the settings you
have made for the sound.
3. CONVOLVER NAME
Click on this to bring up the browser as discussed previously.
ALT/SHIFT/CLICK to remove.
4. OUTPUT
Whilst the convolution triangle controls which source sound
goes through which convolver, and the sound sources can con-
trol the amount they’re affected by the controller, the convolv-
er still has its own dedicated mix stage to control the overall
volume of the convolver against the others and the dry source
sound signals.
5. PITCH
Controls the pitch of the convolver waveform. Hold shift for
fine tuning or double click to enter a specific value.
6. A,D,S,R
Works just the same as with source sounds.
7. RANDOM WAVE & PARAMS
Again, for instant inspiration you can shake it up and randomise
convolver selection just like you can with source sounds.
8. MAPPINGS
This opens the modulation mappings settings discussed in the
‘How To Assign Controls and Automate’
chapter.
9. HPF
To give you ultimate control, alongside source sounds you also
have a high pass filter stage on each convolver.
10. MUTE
Mutes the convolver.
