PAGE 16
PHOBOS - USER MANUAL
A D V A N C E D S O U R C E S O U N D C O N T R O L S
1.
3.
6.
2.
5.
4.
1. PAN & LEVEL
The level controls the overall output. Pan controls the stereo
field of the source (PAN: L50 to C to R50).
2. ENV (ENVELOPE)
The envelope contains all the controls for the envelope across
the amplitude of the source signal.
• Attack
- Controls the speed from note on to when the signal
gets to full level. (0.000-5.000s)
• Hold
- Controls the length of time the source is held at full
level, before decay. (0.000-5.000s)
• Decay
- Controls the speed the source level reduces from full
to the Sustain. (0.000-5.000s)
• Sustain
- Controls the level the source plays after the Attack
+ Hold + Decay time. (-
∞
to 0.0dB)
• Release
- Controls the time taken after note off for the signal
to reduce to -
∞
dB. (0.000-5.000s)
• Curve
- Adjusts the contour of the release curve, 0.0 is linear,
+10 is convex, -10 is concave.
3. START OFFSET
Using the Start Offset you can adjust the starting point of the
source material, which is great for jumping into a certain part
of a loop, or an evolving pad. Using the % knob you can jump in
at any point (%: 0% to 100%). Combining this with the quantise
option you can offset by beat related amounts, quantising the
value of the % knob to the set value. (QUANTISE: OFF, 1/64 to
4/1). In addition to this, the quantise amount can be Dotted or
turned into a triplet by using the relevant button.
In addition to the options on the Overview screen of Phobos,
there is a set of controls to further adapt each Source. These
can be accessed by clicking on the number of the Source you
wish to edit.
CLICK HERE
7.
8.
