12/01/2016
Vers. 1.0
56
14.8 Weight Test
In this page you can check the calibration of the scales. Place a sample weight on the scales and check if the value
indicated in the two fields is correct.
15 Setup
The Setup menu has the following icon.
15.1 Time/Date Setting
The user can change the time and date.
15.2 Warm Up
From this page you can activate or deactivate the
“Warm Up” function.
While “Warm Up” is enabled the station, during the automatic cycle, will wait for the oil temperature to
reach 40°C and then it continues with the other programmed operations (additive charge, washing and
oil change).
N.B.: during the “Warm Up” the vehicle must be turned on and the gearshift must be places on “P”.
15.3 Language
This function allows to select the menu language.
15.4 PC Connection
This function allows to updated the station software.
15.5 Oil Setting
The user can set the density of the oil either new or used by setting the gr./lt. values. In the first page the
density value both for the new oil and the used oil (expressed in gr./lt.) can be set by operator.
In the second page (AWS) the station can automatically calculate the density of the oil. You need to
enter the quantity in liter of the oil that has just been charged into the new oil tank and then the station will
automatically calculate the gr./lt. density.
