12/01/2016
Vers. 1.0
54
14.2 New Oil Change
Use this function when you change the oil type in order to clean the charge hose and avoid any contamination
between different oil types.
N.B.: A connection on the outlet of the Pressure hose needs to be placed in order to drain a small quantity
of oil in an external container.
14.3 Used oil drain
From the home screen it is possible to see the quantity of oil in the waste oil tank. The station is equipped with a
check device which does not allow to perform oil change operations whereas the tank is overfilled. It is advisable to
always check the quantity of oil in the used oil tank.
With this function, the internal used oil tank is emptied.
The oil drain takes place through the Pressure hose.
N.B.: Before starting the function, you will need to open the rapid coupling on the Pressure hose by using
any adapter in the standard kit.
Click on the arrow key UP
to start the function;
Press the
key to stop the procedure
N.B.: the procedure stops automatically when there will be only 1lt of used oil left in the tank.
14.4 Print
With this function the user can print the last performed operations, either in manual or automatic mode.
On the print report you will find:
•
If the additive has been used or not;
•
If the washing has been performed;
•
If the filter has been changed (in manual mode);
•
How much oil has been replaced
