12/01/2016
Vers. 1.0
42
7 Preparation of the Station
IMPORTANT
THE STATION MUST BE CONNECTED TO AN ELECTRICAL OUTLET PROTECTED FROM INDIRECT CONTACT IN
ACCORDANCE WITH THE RULES IN FORCE IN THE COUNTRY OF USE
ENSURE THAT THE MAIN VOLTAGE IS AS INDICATED ON THE RATING PLATE NEAR THE OUTLET
7.1 Preparing the oil
•
Insert into the new oil tank a sufficient amount of oil specific for ATF (at least 2lt more than the total quantity
present in the transmission).
N.B.: check the needed oil type according to the gearbox type on which you will be working.
By charging an oil type with different characteristics from the ones required by the manufacturer into the
gearbox, you risk damaging the gearbox.
•
Check on the display the total amount of used oil in the internal tank of the ATF, ensuring that there is enough
room for oil recovery.
•
To discharge the waste oil you can use the function described in par. 14.3.
7.2 Preparing the washing fluid
•
In order to wash the gearbox you need to put the appropriate fluid into the small bottle on the back of the ATF.
N.B.: We do not recommend washing using additive in very old automatic transmissions (cars with
more than 150.000 km).
•
Insert the washing fluid into the additive bottle, mixing it with some new oil (ratio 1:1)
Image 15 - Washing fluid
