12/01/2016
Vers. 1.0
48
10.3.1 Washing the radiator
Provided that the connection schema 1 has been followed, once the pan has been removed and before placing the
new filter you can wash the radiator.
CAUTION: Whereas schema 2 has been followed for connecting the ATF, you will have to skip this step.
Place an appropriate container under the pan and while the carter is
disassembled press the arrow UP key
until you can see clean oil
falling off from the pan.
The station will start loading oil from the “Pressure” hose and the
quantity of oil will be displayed in the “NEW” field (you can see it in red
in the picture), while the numeric value in green represents the total oil
in the new oil tank.
Stop washing the radiator when the falling liquid looks clean by pressing the key
.
At this point, clean the pan very well and place the new filter.
Press the arrow key UP
and let the ATF charge in the pan the same oil quantity drained in the previous
phase and indicated in the OLD field (in red).
Stop the charging phase by pressing
.
The quantity of new oil charged is shown in the NEW field (in orange) while the field in green indicates the quantity
of new oil in the tank.
Image 20
– Washing the radiator
