9 |
S p e d o 2 6 0 0 O p e r a t o r M a n u a l
S p e d o U K L t d
9
Spedo 2600 Pinless Cutter Operator Manual
Width of Contin
u
ous Web:
510 mm (20inches)
Feed Sp
e
ed:
Rotary control, continuously adjustable.
Counter Type:
Integrated multifunction batch counter.
Powe
r
Requirements:
Voltage:
230 V +/-10%
Frequency:
50 Hz to 60 Hz.
Power Consumption:
690 W (approx).
Noise Emissions:
69dB
D
i
mensions:
Length:
575 mm.
Width:
980 mm.
Height:
1070 mm.
Weight:
140 kg (approx).
Options
Options are listed in Appendix A1 to this section.
DESCRIPTION OF OPERATION
Spedo 2600 Pinless Forms Cutter
Paper is fed into the machine under the paper tension brush, over the in-feed plate, along the paper
supports onto two paper guide units. Once the paper guide units have been adjusted for width and
thickness (weight) of paper web, the web is `jogged' forward and backwards by the operator until it has
been aligned with the edge of the paper guide unit flaps.
At this stage, if the carrier sides (margins) are to be cut off, LH and RH trimmers can be engaged, their
precise position being set by aligning their cut marks with the carrier perforations. In addition, a centre
cutter can be engaged and aligned by the operator at this point, if required.
The machine is capable of operating in conjunction with an ancillary unit (e.g. a web control, printer or
labeller) and successful co-operation between the two units depends on the loop of paper that forms
between the two machines. The presence of paper feeding into the machine is detected by a paper run
out switch located on the in-feed plate. If the paper runs out, the machine automatically stops.
