18 |
S p e d o 2 6 0 0 O p e r a t o r M a n u a l
S p e d o U K L t d
18
Spedo 2600 Pinless Cutter Operator Manual
Setting the Strip Depth in Dual Cut Mode
When in dual cut mode, the machine makes a cut immediately before and after a perforation, resulting in
a strip being cut out. The strip depth value is set in terms of line increment on the Strip Depth switch.
Consider Example 1 again. A form depth of 11
1
/
4
is to be cut from a 12-inch web:
12 - 11
1
/
4
=
3
/
4
.
This means that a 3/4 inch strip must be cut out between forms. A
3
/
4
inch depth at a line increment of 1/8
in works out as|:
8/4
=
2
2 x 3
=
6 lines.
With the value 6 set on the Strip Depth switch, 6 must be deducted from the original value of 90 set in for
a single cut, so that 84 is now set-in on the Form Depth switch.
The Strip Depth switch can be set in the range 0 to 9 (lines) and these will relate to the line increment
setting selected.
The cut positions can now be `fine tuned' by the using the JOG pushbuttons to determine how many lines
before and after the perforation line the cuts are made ( i.e., 3 lines before and 3 lines after, or 1 line
before and 5 lines after, etc.)
Multiple strips can also be performed by increasing the STRIP[X] multiplier function.
11 1/4 "
FORM DEPTH
3/4 " STRIP
3/4 " STRIP
Spedo UK
Unit 5 Riverwey
Newman Lane
Alton, Hampshire
GU34 2QL
Purchase Order 10101
Spedo UK
Unit 5 Riverwey
Newman Lane
Alton, Hampshire
GU34 2QL
Purchase Order 10101
Spedo UK
Unit 5 Riverwey
Newman Lane
Alton, Hampshire
GU34 2QL
Purchase Order 10101
Spedo UK
Unit 5 Riverwey
Newman Lane
Alton, Hampshire
GU34 2QL
Purchase Order 10101
Spedo UK
Unit 5 Riverwey
Newman Lane
Alton, Hampshire
GU34 2QL
Purchase Order 10101
Spedo UK
Unit 5 Riverwey
Newman Lane
Alton, Hampshire
GU34 2QL
Purchase Order 10101
