Spectra Watermakers LB-1800C, Инструкция по установке и эксплуатации

Страница: 40 / 53

40
Dealer Access Point—Settings
Dealer Access Settings
It is highly recommended that users consult with a factory trained technician before altering any settings
behind the ‘ Dealer Access Point ’. Changing this settings without understanding the full effect of
each change can void the warranty of your system, and cause irreparable damage.
If any settings are inadvertently changed, they can be reverted back to the defaults by using the
‘ Factory Reset ’ feature.
Default Login: admin
Default Password: admin
System Model: Configures the Spectra Connect for a different system model from a preset list of op-
tions.
Clear Statistics: Resets all of the Estimated Maintenance Intervals back to 100%. This feature should
only be used on a brand new system.
Change Username/password: Changes the default username and password. If you forget your
changed username and password, a Factory Reset will revert back to the default username and pass-
word.
Set MFD: Changes the Manufactured Date on the system. This should only be adjusted if a control
board is being replaced on an older system.
Set Serial ID: Changes the Serial Number recorded in the Spectra Connect. This should only be ad-
justed if a control board is being replaced on an older system.
Limit Runtime: Limits the maximum run time for the system before shutting down and fresh water
flushing. Disabling this setting allows the watermaker to be operated 24/7.