SPECTRA PRECISION FOCUS 2 SERIES TOTAL STATION USER GUIDE
5 –
Applications
67
Coordinates stakeout
To start a stakeout by coordinates:
1. From the
Stakeout
menu, press
[2]
(or press
[v]
and
[REC/ENT]
) to select
XYZ
.
2. Do one of the following:
–
Enter the name of the point to be staked and press
[REC/ENT]
. After finding the point name, the program
proceeds to Step 4. To display the coordinates, press
[REC/ENT]
to confirm.
–
Specify a stakeout list by range input. To enter points by
range, press the
Fr/To
softkey in the PT field, as
shown. Enter the start point (Fr) and the end point (To).
The last digit of the point name must be a number. If
existing points are found between Fr and To, a point list
is displayed.
The screen stays on the measured results. Press
[REC/ENT]
to
display detailed information.
For a detailed description of the data, see Data, page 112.
Screen 6/8
This screen displays coordinate deviation values, press
[REC/ENT]
to
record data.
Screen 7/8
Press
[HOT]
to change the height of target. See screen 2/8.
Screen 8/8
If the secondary distance unit is set, the screen 8/8 appears.
For setting a secondary unit, see Settings, page 110.
Display
Description
