Spectra Logic Spectra 50, Дополнительное руководство

Страница: 14 / 15

14
Spectra 50-Series Library Tape Drive Replacement Guide
Returning the Library to Operation
Replacing the Cover
1. Place the cover back onto the library (Figure 26), and gently push it forward (Figure 27) until it
clicks into place.
Figure 26 Placing the cover back on the library. Figure 27 Sliding the cover forward.
2. Tighten the seven Phillips screws in
the library cover (Figure 28).
• Four screws in the top center of
the cover.
• Three screws on the rear of the
cover.
Figure 28 The seven screws in the library cover.
Screws