![Spectra Logic Spectra 50 Скачать руководство пользователя страница 9](http://html1.mh-extra.com/html/spectra-logic/spectra-50/spectra-50_supplementary-manual_1343480009.webp)
9
Spectra 50-Series Library Tape Drive Replacement Guide
4.
Disconnect the SCSI or Fibre Channel cable(s)
from the drive(s).
SCSI cables are flat and white (shown in
Figure 11). Remove them by holding the sides
of the connector and gently pulling outward.
Fibre Channel cables are thin and orange.
Remove them by pinching the top and bottom
of the connector, then gently pulling outward.
Figure 11
The SCSI cables.
5.
Loosen the two thumbscrews located near the
back of the DBA (Figure 12).
Figure 12
The thumbscrews as seen from above.
6.
Slide the DBA back, toward the rear of the
library, until the base of the DBA is clear of the
captive pin (Figure 13).
Figure 13
The captive pin.
7.
Lift the DBA up and out of the library (Figure 14)
and place it on a flat work surface.
Figure 14
Pulling the DBA out of the library.
Pin