6
Spectra 50-Series Library Tape Drive Replacement Guide
Using the Run Robotics Utility
9.
Once you know which magazine carrier is empty, use the Belt and Door Diagnostics screen to
move the magazine carrier behind the drives.
You accomplish this by moving to the door the magazine that is opposite the empty magazine
carrier; simply calculate the opposite it by adding or subtracting five to or from the empty
magazine number. For example:
• If Magazine 3 is empty, move Magazine 8 to the door.
• If Magazine 6 is empty, move Magazine 1 to the door.
1.
Use the library’s front panel to select
Maintenance >
Utilities
; the Basic Utilities screen appears.
2.
Select
Show Advanced
; a confirmation screen appears.
3.
Select
Yes
; the Advanced Utilities screen appears.
4.
Scroll down the list of utilities; find and
select the Run Robotics Utility.
5.
Tap
Select
; a Description screen appears that describes
this utility.
6.
Select
Run
.
A progress screen appears for a few seconds,
then the Robotic Tests screen appears (Figure 3).
7.
Select
Belt and Door
; the Belt and Door
Diagnostics screen appears (Figure 4).
8.
If you don’t know which magazine carrier is empty, use
the Belt and Door Diagnostics screen to move each
magazine to the door, and open and close the door to
check if you have selected an empty one.
If there are no empty magazines, open the door and
remove one, then close the door.
Figure 3
The Robotic Tests screen.
Figure 4
The Belt and Door Diagnostics screen.
